CNC Programmer Average Salary in Jeddah 2024
How much money does a person working as CNC Programmer make in Jeddah?
LOW
5,240
SAR AVERAGE
11,400
SAR HIGH
18,100
SAR
A person working as CNC Programmer in Jeddah typically earns around 11,400 SAR. Salaries range from 5,240 SAR (lowest) to 18,100 SAR (highest).
Salary Variance
This is the average salary including housing, transport, and other benefits. CNC Programmer salaries in Jeddah vary drastically based on experience, skills, gender, or location. Below you will find a detailed breakdown based on many different criteria.
CNC Programmer Pay Scale and Salaries in Jeddah
Salary Structure and Pay Scale Comparison
10,800 SAR or more
9,460 to 10,800 SAR
6,520 SAR or less
6,520 to 9,460 SAR
 5,240 SAR |
10,900 SAR |
18,100 SAR |
Median Salary, maximum and minimum salary, minimum wage, starting salary, and the salary range
Salary Range, Minimum Wage, and Starting Salary
Salaries for the position CNC Programmer in Jeddah range from 5,240 SAR (starting salary) to 18,100 SAR (maximum salary). It should be noted that the given figure is not the legally mandated minimum wage; rather, it represents the lowest figure reported in a salary survey that included thousands of participants and professionals from all regions of the country.
Median Salary
With a median salary of 10,900 SAR, half of the professionals who work as CNC Programmer in Jeddah earn less than this amount, and the other half earn more. The median salary denotes the middle value of salaries. Ideally, you would want to belong to the group earning more than the median salary, located on the right side of the salary distribution graph.
Percentiles and Salary Scale
The median is closely associated with two other values known as the 25th and 75th percentiles. By examining the salary distribution chart, it can be determined that 25% of professionals employed as CNC Programmer in Jeddah earn less than 8,770 SAR, while 75% earn more. Similarly, the chart shows that 75% earn less than 12,500 SAR while 25% earn more.
Pay Scale Structure
To provide a better understanding of expected salaries, we categorized the frequently occurring salaries into different ranges. This approach provides a more precise representation of salary distribution for the job title CNC Programmer in Jeddah compared to simply calculating the average. The majority of reported salaries, approximately 65%, fall within the range of 6,520 SAR to 9,460 SAR. About 20% of salaries are below the 6,520 SAR mark, while 10% fall within the range of 9,460 SAR to 10,800 SAR. Only 5% of individuals have salaries exceeding 10,800 SAR.
Salary Comparison by Years of Experience / CNC Programmer / Jeddah
How do experience and age affect pay?
| 0 - 2 Years | 5,940 SAR | |
| 2 - 5 Years | +34% | 7,940 SAR |
| 5 - 10 Years | +48% | 11,700 SAR |
| 10 - 15 Years | +22% | 14,300 SAR |
| 15 - 20 Years | +9% | 15,600 SAR |
| 20+ Years | +8% | 16,900 SAR |
The experience level is the most important factor in determining the salary. Naturally, the more years of experience the higher the wage. We broke down salaries by experience level for people working as CNC Programmer and this is what we found.
Employees with less than two years of experience earn approximately 5,940 SAR.
While someone with an experience level between two and five years is expected to earn 7,940 SAR, 34% more than someone with less than two year's experience.
Moving forward, an experience level between five and ten years lands a salary of 11,700 SAR, 48% more than someone with two to five years of experience.
Additionally, professionals whose expertise span anywhere between ten and fifteen years get a salary equivalent to 14,300 SAR, 22% more than someone with five to ten years of experience.
If the experience level is between fifteen and twenty years, then the expected wage is 15,600 SAR, 9% more than someone with ten to fifteen years of experience.
Lastly, employees with more than twenty years of professional experience get a salary of 16,900 SAR, 8% more than people with fifteen to twenty years of experience.
Typical Salary Progress for Most Careers
Salary Comparison By Education / CNC Programmer / Jeddah
How do education levels affect salaries?
Displayed below is the average salary variance between different education levels of professionals working as CNC Programmer.
| Certificate or Diploma | 6,910 SAR | |
| Bachelor's Degree | +93% | 13,300 SAR |
We all know that higher education equals a bigger salary, but how much more money can a degree add to your income? We broke down salaries by education level for the position CNC Programmer in order to make a comparison.
Level 1: Certificate or Diploma
Employees at this education level have an average salary of 6,910 SAR.
Level 2: Bachelor's Degree
At this level, the average salary becomes 13,300 SAR, 93% more than the previous level.
Typical Salary Difference by Education for Most Careers
Salary and Compensation Comparison By Gender / CNC Programmer / Jeddah
Though gender should not have an effect on pay, in reality, it does. So who gets paid more: men or women? For the people who work as CNC Programmer in Saudi Arabia, the average difference between the salary of male and female employees is 14%.
| Male | 11,500 SAR | |
| Female | -12% | 10,100 SAR |
Salary Comparison By Gender in Saudi Arabia for all Careers
Average Annual Salary Increment Percentage / CNC Programmer / Jeddah
How much are annual salary increments in Jeddah for individuals working as CNC Programmer? How often do employees get salary raises?
Individuals working as CNC Programmer in Saudi Arabia are likely to observe a salary increase of approximately % every months. The national average annual increment for all professions combined is 8% granted to employees every 17 months.
Saudi Arabia / All Professions
The term Annual Salary Increase usually refers to the increase in 12 calendar month period, but because it is rare that people get their salaries reviewed exactly on the one-year mark, it is more meaningful to know the frequency and the rate at the time of the increase.
How to calculate the salary increment percentage?
The annual salary Increase in a calendar year (12 months) can be easily calculated as follows: Annual Salary Increase = Increase Rate x 12 / Increase Frequency
Worldwide Salary Raises: All Countries and All Jobs
Salary Packages and Schemes
Not all compensation increases are reflected directly in the salary. Some companies offer upgraded packages to their staff instead of cash money. The figures displayed here account only for direct increments to the base salary.
Bonus and Incentive Rates / CNC Programmer / Saudi Arabia
How much and how often are bonuses being awarded?
Share This Chart Tweet Get Chart Linkhttp://www.salaryexplorer.com/charts/saudi-arabia/factory-and-manufacturing/cnc-programmer/annual-salary-bonus-rate-saudi-arabia-cnc-programmer.jpg
100% of surveyed staff reported that they haven't received any bonuses or incentives in the previous year while % said that they received at least one form of monetary bonus.
Those who got bonuses reported rates ranging from % to % of their annual salary.
| Received Bonus | % | |
| No Bonus | 100% |
Types of Bonuses Considered
Individual Performance-Based BonusesThe most standard form of bonus, where the employee is awarded based on their exceptional performance.
Company Performance BonusesOccasionally, some companies like to celebrate excess earnings and profits with their staff collectively in the form of bonuses that are granted to everyone. The amount of the bonus will probably be different from person to person depending on their role within the organization.
Goal-Based BonusesGranted upon achieving an important goal or milestone.
Holiday / End of Year BonusesThese types of bonuses are given without a reason and usually resemble an appreciation token.
Bonuses Are Not Commissions!
People tend to confuse bonuses with commissions. A commission is a prefixed rate at which someone gets paid for items sold or deals completed while a bonus is in most cases arbitrary and unplanned.
What makes a position worthy of good bonuses and a high salary?
The main two types of jobs | |
| Revenue Generators | Supporting Cast |
Employees that are directly involved in generating revenue or profit for the organization. Their field of expertise usually matches the type of business. | Employees that support and facilitate the work of revenue generators. Their expertise is usually different from that of the core business operations. |
Example: | Example: |
Revenue generators usually get more and higher bonuses, higher salaries, and more frequent salary increments. The reason is quite simple: it is easier to quantify your value to the company in monetary terms when you participate in revenue generation.
Bonus Comparison by Seniority Level
Top management personnel and senior employees naturally exhibit higher bonus rates and frequencies than juniors. This is very predictable due to the inherent responsibilities of being higher in the hierarchy. People in top positions can easily get double or triple bonus rates than employees down the pyramid.
Average Hourly Wage / CNC Programmer / Jeddah
66 SAR per hourThe average hourly wage (pay per hour) for individuals working as CNC Programmer in Jeddah is 66 SAR.This is the rate they get paid for every worked hour.
About The Hourly Pay Rate
The hourly wage is the salary paid in one worked hour. Usually, jobs are classified into two categories: salaried jobs and hourly jobs. Salaried jobs pay a fixed amount regardless of the hours worked. Hourly jobs pay per worked hour. To convert salary into hourly wage the above formula is used (assuming 5 working days in a week and 8 working hours per day which is the standard for most jobs). The hourly wage calculation may differ slightly depending on the worked hours per week and the annual vacation allowance. The figures mentioned above are good approximations and are considered to be the standard. One major difference between salaried employees and hourly paid employees is overtime eligibility. Salaried employees are usually exempt from overtime as opposed to hourly paid staff.
What is the minimum hourly rate of pay?
The minimum pay rate per hour for people working as CNC Programmer in Jeddah is 30 SAR. This is the minimum as per the gathered data in the salary survey not the minimum hourly rate mandated by law.
Salary comparison with similar jobs
| Job Title | Average Salary |
| Factory and Manufacturing |  -100% | |
| 3D Printing Technician | 10,800 SAR | -5% |
| Additive Manufacturing Engineer | 13,900 SAR |  +22% |
| Assembly Foreman | 4,670 SAR | -59% |
| Assembly Line Worker | 4,860 SAR | -57% |
| Assembly Supervisor | 7,440 SAR | -35% |
| Assistance Maintenance Manager | 17,700 SAR | +55% |
| Assistant Shipping Manager | 15,500 SAR | +36% |
| Automation Process Analyst | 11,200 SAR | -2% |
| Chemical Equipment Controller | 10,900 SAR | -4% |
| Chemical Technican Apprentice | 9,180 SAR | -19% |
| CNC Machinist | 10,600 SAR | -7% |
| CNC Operator | 10,600 SAR | -7% |
| CNC Programmer | 11,400 SAR | +0% |
| Colour Technologist | 5,870 SAR | -48% |
| Contracts Manager | 19,900 SAR | +75% |
| Data Collection Coordinator | 7,940 SAR | -30% |
| Demand Planner | 6,820 SAR | -40% |
| Derrick Operator | 4,800 SAR | -58% |
| Digital Twin Engineer | 14,000 SAR | +23% |
| Director of Manufacturing | 28,800 SAR | +150% |
| Dock Worker | 4,550 SAR | -60% |
| Drying Technician | 4,760 SAR | -58% |
| Equipment Operator | 4,210 SAR | -63% |
| Export Sales Coordinator | 15,100 SAR | +33% |
| Factory Superintendent | 7,210 SAR | -37% |
| Factory Worker | 5,370 SAR | -53% |
| Failure Analysis Technician | 7,420 SAR | -35% |
| Fiberglass Laminator | 5,250 SAR | -54% |
| Food Technologist | 8,790 SAR | -23% |
| Forklift Driver | 4,830 SAR | -58% |
| Forklift Operator | 4,990 SAR | -56% |
| Forming Machine Operator | 4,970 SAR | -56% |
| Furnace Operator | 4,640 SAR | -59% |
| Gas Appliance Repairer | 5,030 SAR | -56% |
| General Warehouse Associate | 8,330 SAR | -27% |
| Green Product Designer | 13,900 SAR | +22% |
| Heavy Equipment Operator | 6,200 SAR | -46% |
| HSE Manager | 19,800 SAR | +74% |
| Industrial Cybersecurity Specialist | 14,800 SAR | +30% |
| Industrial Engineer | 15,400 SAR | +35% |
| Industrial Machinery Mechanic | 9,660 SAR | -15% |
| Industrial Production Manager | 28,900 SAR | +150% |
| Industrial Safety and Health Engineer | 15,000 SAR | +32% |
| Intake Operator | 6,190 SAR | -46% |
| Key Account Manager | 22,200 SAR | +95% |
| Lean Manufacturing Specialist | 14,900 SAR | +31% |
| Lift Truck Operator | 5,080 SAR | -55% |
| Loading Supervisor | 8,870 SAR | -22% |
| Logistic Coordinator | 12,300 SAR | +8% |
| Logistics Clerk | 6,130 SAR | -46% |
| Machine Operator | 4,960 SAR | -56% |
| Machinist | 4,900 SAR | -57% |
| Maintenance Manager | 17,900 SAR | +57% |
| Maintenance Store Clerk | 5,390 SAR | -53% |
| Manufacturing Engineer | 15,700 SAR | +38% |
| Manufacturing Engineering Manager | 22,300 SAR | +96% |
| Manufacturing Engineering Technologist | 16,600 SAR | +46% |
| Manufacturing Manager | 26,100 SAR | +130% |
| Manufacturing Operative | 7,920 SAR | -30% |
| Manufacturing Production Technician | 6,230 SAR | -45% |
| Manufacturing Supervisor | 13,800 SAR | +21% |
| Manufacturing Technician | 5,750 SAR | -49% |
| Materials Manager | 21,800 SAR | +92% |
| Materials Supervisor | 14,100 SAR | +24% |
| Mechanical Fitter Engineer | 16,400 SAR | +44% |
| Mechanical Foreman | 4,740 SAR | -58% |
| Merchandise Planner | 8,280 SAR | -27% |
| Metrology Engineer | 15,300 SAR | +34% |
| Operations Engineer | 14,100 SAR | +24% |
| Operations Manager | 23,200 SAR | +100% |
| Order Management Coordinator | 12,200 SAR | +7% |
| Order Processing Manager | 19,700 SAR | +73% |
| Order Selector | 5,940 SAR | -48% |
| Package Handler | 4,660 SAR | -59% |
| Packaging Manager | 15,900 SAR | +40% |
| Packer | 4,680 SAR | -59% |
| Packing Deputy Supervisor | 13,200 SAR | +16% |
| Planning Manager | 22,800 SAR | +100% |
| Plant Manager | 26,600 SAR | +130% |
| Precision Instrument Repairer | 7,360 SAR | -35% |
| Predictive Maintenance Analyst | 14,700 SAR | +29% |
| Process Technician | 6,100 SAR | -46% |
| Product Manager | 26,000 SAR | +130% |
| Production Analyst | 21,800 SAR | +92% |
| Production Director | 30,400 SAR | +170% |
| Production Engineer | 15,600 SAR | +37% |
| Production Engineering Supervisor | 24,000 SAR | +110% |
| Production Inspector | 16,200 SAR | +42% |
| Production Laborer | 4,450 SAR | -61% |
| Production Manager | 28,000 SAR | +150% |
| Production Operator | 6,580 SAR | -42% |
| Production Scheduler | 11,700 SAR | +3% |
| Production Supervisor | 15,200 SAR | +34% |
| Production Technician | 6,930 SAR | -39% |
| Production Worker | 6,340 SAR | -44% |
| Quality Control Analyst | 20,900 SAR | +84% |
| Quality Control Inspector | 16,900 SAR | +48% |
| Quality Control Manager | 22,200 SAR | +95% |
| Service Technician | 6,190 SAR | -46% |
| SHEQ Officer | 7,530 SAR | -34% |
| Shipping Manager | 24,400 SAR | +110% |
| Small Engine Mechanic | 8,140 SAR | -28% |
| Smart Factory Consultant | 17,900 SAR | +57% |
| Spray Painter | 4,720 SAR | -59% |
| Sterile Processing Technician | 5,450 SAR | -52% |
| Structural Welder | 4,220 SAR | -63% |
| Supply Chain Operative | 13,700 SAR | +20% |
| Sustainable Manufacturing Specialist | 20,700 SAR | +82% |
| Technical Operator | 6,130 SAR | -46% |
| Technology Development Manager | 27,400 SAR | +140% |
| Testing Technician | 11,000 SAR | -3% |
| Toolmaker | 7,570 SAR | -33% |
| Warehouse Forklift Operator | 4,990 SAR | -56% |
| Warehouse Operative | 5,150 SAR | -55% |
| Warehouse Worker | 5,420 SAR | -52% |
| Warranty Handler | 8,830 SAR | -22% |
| Welder | 4,980 SAR | -56% |
| Workshop Manager | 17,300 SAR | +52% |
Salary Comparison By City
| City | Average Salary |
| Jeddah | 11,400 SAR |
| Riyadh | 11,800 SAR |
Government vs Private Sector Salary Comparison
Where can you get paid more, working in a private company or the government? The difference between the public or government sector salaries and the private sector salaries in Saudi Arabia is 7% on average across all career fields.
| Private Sector | 16,100 SAR | |
| Public Sector | +7% | 17,300 SAR |
Salary Statistics and Calculation Guide
What is considered to be a good and competitive salary for the job title CNC Programmer in Jeddah?
A good and competitive compensation would range anywhere between 10,900 SAR and 12,500 SAR. This is a very rough estimate. Experience and education play a very huge part in the final earnings.
Gross Salary (before tax) and Net Salary (after tax)
All salary and compensation figures displayed here are gross salary figures, that is the salary before tax deductions. Because taxes may differ across sectors and locations, it is difficult to accurately calculate the net salary after tax for every career.
Base / Basic Salary
The base salary for a careers like CNC Programmer in Jeddah ranges from 5,240 SAR to 8,770 SAR. The base salary depends on many factors including experience and education. It is not easy to provide a figure with very little information, so take this range with a grain of salt.
What is the difference between the median and the average salary?
Both are indicators. If your salary is higher than both the average and the median then you are doing very well. If your salary is lower than both, then many people earn more than you and there is plenty of room for improvement. If your wage is between the average and the median, then things can be a bit complicated. We wrote a guide to explain all about the different scenarios. How to compare your salary
